All of our Magnetic Breakaway Plasma Torch Protection System products are built with a universal mounting base.  This base has six different mounting patterns for mounting to just about any torch riser in minutes.  It is a direct mount to many CNC cutting tables, such as PlasmaCam/Samson, GoTorch, Dynatorch, Velox Z axis and Precision Plasma plus many others.  We have customized adapters for the Torchmate, BurnTable, ShopSabre and various other systems.

All units are shipped with a basic stainless hardware mounting kit and safety lanyards.
We do manufacture and offer adapters for a few of the CNC cutting tables that come from the factory with their torch holder as part of the riser assembly such as Torchmate.

We use rare earth magnets on both the mount for the riser and the torch mount plate.  Utilizing the magnets this way makes the two halves self-aligning.  It’s a far better design overall!

It has proven to be a better design than a breakaway that uses magnets on only one side of the breakaway and some kind of metal plate and alignment pin system on the other.  Alignment pins work however, breakaway force will in fact change in relation to alignment pin placement.  All of the magnets are pressed in precision machined counter bores.  There is no way for these magnets to ever pull out of their attracting sides.

You will see the precision fit and build quality the minute you remove it from the shipping box.

The plasma torch outer holding clamp has the gear rack slot machined into it which allows you to use a plasma machine torch with or without the gear rack attached.  This is a feature not seen in other products.

Another great reason for a gear rack slot is that the standard plasma machine torch barrel is 1 3/8” diameter which is the exact same diameter as an oxy-fuel machine torch.  This neat feature allows you to use an oxy fuel machine torch without having to remove the gear rack.

Some of our customers have their CNC cutting tables set up with both plasma and oxy fuel torches.

The Plasma Torch Protection System works great with floating torch riser systems found on some CNC cutting tables.

Another great feature you won’t find in any other magnetic torch breakaways at this price is that our Magnetic Breakaway Machine Torch Mount allows you to bevel cut.

Standard universal Magnetic Breakaway CNC plasma torch holder.  This unit is by far our most popular model.  It will fit the majority of CNC Cutting tables.  It is a direct mount to PlasmaCam, Samson, DHC2, GoTorch, Dynatorch, Velox Z Axis and many others.  For BurnTable order item # MB-1/BT.

This unit is shipped with the industry standard 1-3/8 inch inside diameter plasma machine torch clamp. The 8 rare earth magnets provide 58 pounds of holding force. This is the choice for many home built CNC cutting tables.

Torchmate Model 1,2, and 3 equipped with arc voltage height control (AVHC) CNC cutting tables only.

Comes with all adapters needed to directly mount to your Torchmate riser assembly.

**Note:  very early non AHVC Torch Mate Cutting tables will use the MB-1.

If you are replacing worn out torch mate factory magnet breakaway, contact Boss Manufacturing for Mounting information.

Same exact unit as MB-1 however it is shipped with a 1-3/4 inch inside diameter torch clamp to allow the use of Hypertherm’s Model 125 Plasma Torch Barrel.

This is a specialized unit to allow the use of a High Definition Plasma Machine Torch. This type of plasma torch has a 2 inch inside diameter torch clamp and is made for High Definition Machine Plasma Torches. The universal mounting arrangement is the same as MB-1 but the breakaway has 12 rare earth magnets to support the increased weight of the high definition plasma torch providing 87 pounds of holding force.